Analytical strategies for clinical studies on dental erosive wear.
Options
BORIS DOI
Publisher DOI
PubMed ID
31349831
Description
BACKGROUND
There is a need for analytical techniques for measuring Erosive Tooth Wear (ETW) on natural surfaces in clinical studies. The purpose was to investigate the use of two instruments aimed to assess initial to more advanced stages of ETW.
METHODS
Human premolar enamel samples (2x3mm) (n = 24), were polished flat and mounted in resin cylinders (4 cylinders, 6 samples in each). Part 1: Baseline analyses by White Light Interferometer (WLI), Surface Reflection Intensity (SRI: TableTop and OptiPen) and Surface Hardness (SH). Erosion (1% citric acid (pH 3.6) for 1, 2, 4, 6, 8, 10 min. SRI and SH analyses after every erosion episode and by WLI after 10 min. New indentations were made and enamel loss; was measured by change in indentation depths from toothbrush abrasion (200 g, 60 strokes, 30 s). Another series of 2 × 5 min erosion (totally15 min and 20 min) was analysed with SH and SRI after each erosion, and by WLI (on samples and impressions of samples) after 20 min. Part 2 investigated WLI performance in the interface where initial erosion increases in severity and substance loss occurs. The samples were repolished. Baseline analyses by WLI, SRI (TableTop and OptiPen) and SH. Four cylinders were etched for 1, 2, 4, 8 min respectively and analysed by SRI, SH on samples, and WLI on samples and impressions).
RESULTS
Part1: SRI decreased from baseline to ~ 6 min etch and increased slightly after abrasion, the two devices correlated well (ICC 0.98 p < 0.001, Spearmans rs 0.91 p < 0.001). SH decreased nearly linearly to 10 min etch, but increased distinctly after abrasion. Mean enamel loss from abrasion alone was 0.2 μm (change in indentation depths). After 10 min etch, it was 0.27 μm (WLI) and after 20 min etch, it was 2.2 μm measured on samples vs 2.4 μm on impressions of samples (7% higher). Part 2: From baseline to 8 min etch; SRI and SH decreased whereas WLI presented increasing etch depths.
CONCLUSIONS
With some adjustments, the use of SRI and WLI in combination seems to be a promising strategy for monitoring ETW in clinical studies.
There is a need for analytical techniques for measuring Erosive Tooth Wear (ETW) on natural surfaces in clinical studies. The purpose was to investigate the use of two instruments aimed to assess initial to more advanced stages of ETW.
METHODS
Human premolar enamel samples (2x3mm) (n = 24), were polished flat and mounted in resin cylinders (4 cylinders, 6 samples in each). Part 1: Baseline analyses by White Light Interferometer (WLI), Surface Reflection Intensity (SRI: TableTop and OptiPen) and Surface Hardness (SH). Erosion (1% citric acid (pH 3.6) for 1, 2, 4, 6, 8, 10 min. SRI and SH analyses after every erosion episode and by WLI after 10 min. New indentations were made and enamel loss; was measured by change in indentation depths from toothbrush abrasion (200 g, 60 strokes, 30 s). Another series of 2 × 5 min erosion (totally15 min and 20 min) was analysed with SH and SRI after each erosion, and by WLI (on samples and impressions of samples) after 20 min. Part 2 investigated WLI performance in the interface where initial erosion increases in severity and substance loss occurs. The samples were repolished. Baseline analyses by WLI, SRI (TableTop and OptiPen) and SH. Four cylinders were etched for 1, 2, 4, 8 min respectively and analysed by SRI, SH on samples, and WLI on samples and impressions).
RESULTS
Part1: SRI decreased from baseline to ~ 6 min etch and increased slightly after abrasion, the two devices correlated well (ICC 0.98 p < 0.001, Spearmans rs 0.91 p < 0.001). SH decreased nearly linearly to 10 min etch, but increased distinctly after abrasion. Mean enamel loss from abrasion alone was 0.2 μm (change in indentation depths). After 10 min etch, it was 0.27 μm (WLI) and after 20 min etch, it was 2.2 μm measured on samples vs 2.4 μm on impressions of samples (7% higher). Part 2: From baseline to 8 min etch; SRI and SH decreased whereas WLI presented increasing etch depths.
CONCLUSIONS
With some adjustments, the use of SRI and WLI in combination seems to be a promising strategy for monitoring ETW in clinical studies.
Date of Publication
2019-07-26
Publication Type
Article
Subject(s)
Keyword(s)
Clinical studies Erosive tooth wear Measurements
Language(s)
en
Series
BMC Oral Health
Publisher
BioMed Central
ISSN
1472-6831
Access(Rights)
open.access